Differences

This shows you the differences between two versions of the page.

--- blurps:sculpfun_s9 [2024/03/02 11:43] – [Wood] yavannah
+++ blurps:sculpfun_s9 [2024/03/02 11:49] (current) – removed yavannah
@@ Line 1: / Line 1: @@
-====== Sculpfun S9 ======
-We have one Sculpfun S9 in the workshop. Which I barely use.
-Almost everyone else uses it for their pet projects. And most everybody has fiddled out the settings for one specific task.
-But everybody and their cub comes to me asking for the correct settings for stuff I never worked with.
-So, I try to collect the data here, allowing me to make a printout or just tagging this page to the workshop computers "Manuals" bookmarks.
-{{ :blurps:yavannah_cnc-laser.jpeg?nolink&600 |}}
-**Note:**
-For thicker materials you may have to remove the red laser shield and lower the laser head closer than the default distance block permits.
-I'll try to find the best distance and have an alternate distance block printed.
-====== Cutting ======
-Cutting means just that: Completely cutting through the material, similar to fretworks.
-===== Wood =====
-^Material ^Thickness (mm) ^Power (%) ^Speed (mm/m)^Notes ^
-|Plywood | 4 | 50 | | |
-| ::: | 8 | 50 | | |
-===== Acrylic / PMMA =====
-^Material ^Thickness (mm) ^Power (%) ^Speed (mm/m)^Notes ^
-===== Paper / Cardboard =====
-^Material ^Thickness (mm) ^Power (%) ^Speed (mm/m)^Notes ^
-====== Engraving ======
-Engraving is a bad word to describe what is happening in this process. Pyrography would be better.
-The laser heats the material until it darkens on the surface. Variations are possible, ranging from slightly darker hues of the material to charcoal black.
-===== Paper / Cardboard =====
-^Material ^Power (%) ^Speed (mm/m)^Notes ^
-===== Wood =====
-^Material ^Power (%) ^Speed (mm/m)^Notes ^
-===== Acrylic / PMMA =====
-^Material ^Power (%) ^Speed (mm/m)^Notes ^
-===== Stone =====
-^Material ^Power (%) ^Speed (mm/m)^Notes ^
-===== Leather =====
-^Material ^Power (%) ^Speed (mm/m)^Notes ^
-===== Varnish / Paint =====
-^Material ^Power (%) ^Speed (mm/m)^Notes ^
-===== Metal =====
-^Material ^Power (%) ^Speed (mm/m)^Notes ^

Yavannah's Blurps

User Tools

Site Tools

Differences

Page Tools